Single row tapered roller bearings

Contact Now

Taper roller bearings can take both axial and radial loads. The axial load carrying capacity of the bearings is largely determined by the contact angle α as shown in the figure below. If the contact angle α is larger, then the axial load carrying capacity is higher and vice versa.

Taper roller bearings are designed in such a way that vertices of the cone for each roller and those for the inner and outer raceways coincides on the bearing axis or extensions of the raceways and rollers converge at a common point on the axis of rotation. This results in true rolling motion of the rollers on the raceways at every point along the rollers. The taper roller bearings support radial loads and axial loads from one direction only. The line contact between rollers and raceways provide the bearings with a high load carrying capacity.

Steep angle taper roller bearing with exceptionally steep cone angle enables the bearings to take heavier axial load. The bearings are of separable type, enabling separate mounting of cups and cones.Since the taper roller bearings can absorb thrust loads in one direction only, these bearings should generally be installed as opposed mountings. The correct amount of radial and axial clearance is obtained by adjusting the two bearings against each other.Besides, double row and four row taper roller bearings are also widely used for heavy loads such as rolling mills. A single row taper roller bearing can be located endwise in one direction only.

25 mm x 52 mm x 15 mm NTN 4T-30205 Single row tapered roller bearings

ASAHI BEARINGS M06110
0808250380541 Mounted Units &

30 mm x 62 mm x 16 mm NTN 4T-30206 Single row tapered roller bearings

Set Screw Insert Bearings Sphe
Bearing MB251-716-E1PA

25 mm x 52 mm x 15 mm NTN 4T-30205ST Single row tapered roller bearings

B04334 Double Row
23.091 4.125 Inch | 104.775

25 mm x 52 mm x 15 mm NTN 4T-30205P5 Single row tapered roller bearings

0808250459483 Mounted Units &
AMI BEARINGS 1.171

25 mm x 52 mm x 15 mm NTN 4T-30205X1 Single row tapered roller bearings

0 Inch | 0 Millimete 22216
Double Row | Single 23

NTN 4T-25878 Single row tapered roller bearings

Plain Bearings 0
0.0 0846802071523

NTN 4T-25877 Single row tapered roller bearings

0.128 FAG BEARING
B04144 Bearings

36,487 mm x 73,025 mm x 24,608 mm NTN 4T-25880/25821 Single row tapered roller bearings

8483.20.40.80 Flange Block Bearing
6.81 22211

NTN 4T-25880 Single row tapered roller bearings

NSK 0029176634437
1.89 Inch | 48 Milli 2 (1 Pair)

34,925 mm x 73,025 mm x 24,608 mm NTN 4T-25878/25820 Single row tapered roller bearings

B6 1.193 Inch | 30.3 Mi
Pillow Block Set Screw

33,338 mm x 69,85 mm x 25,357 mm NTN 4T-2585/2523 Single row tapered roller bearings

4 Bolt Round Flange 10
Flanged M06288
1/17