Single row deep groove ball bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

25 mm x 47 mm x 12 mm SNR 6005.G15C4 Single row deep groove ball bearings

16 mm 25.5 kN
29 mm 22 mm

25 mm x 47 mm x 12 mm SNR 6005.FT150 Single row deep groove ball bearings

6300 r/min 40 mm
0.8 mm G 40x47x4

25 mm x 47 mm x 12 mm SNR 6005.EE/F47/WT Single row deep groove ball bearings

14.4 -25 °C
120 mm C3

25 mm x 47 mm x 12 mm NTN 6005CM Single row deep groove ball bearings

C3 80 mm
4,300 rpm 44.5 kN

25 mm x 47 mm x 12 mm NTN 6005 Single row deep groove ball bearings

34 mm 12.8 kN
EX201G2 225 mm

25 mm x 47 mm x 12 mm NTN 6005C3 Single row deep groove ball bearings

3.7 Nm 60 mm
97 mm 24 mm
1/17