SAF and SAW pillow blocks with bearings on an adapter sleeve

Contact Now

The most important advantages of the newly developed pillow block housings SAF can be summarized as follows:The housing has higher strength due to the improved housing design, developed using modern calculation methods. This gives higher security against failure of the housing due to overload.The housing material can be selected in accordance with the requirements of the application, always giving the most economical solution.Stockholding is simplified with the ordering of housings in a universal design, since the housing delivery includes standard seals, locating ring, endcover and grease fitting. They are suitable for spherical roller bearings 222..-K as well as for split spherical roller bearings 222S.Due to the range of seal variants, the correct seal can be selected
taking account of the environmental conditions.Marks indicating the center of the housing as well as machined locating faces allow rapid and precise alignment of the housing.Several predefined mounting points give easier mounting of sensors for condition monitoring and connection of the lubricant supply to the housing.Serial numbers marked on the housing cap and base ensure that the upper and lower housing sections are correctly matched during assembly.

skf SAF 22618 x 3.1/16 SAF and SAW pillow blocks with bearings on an adapter sleeve

21 mm 21 mm
053893725086 Steel

skf SAFS 23034 KA x 5.15/16 SAF and SAW pillow blocks with bearings on an adapter sleeve

128 mm 3 mm
103 mm 4 mm

skf FSAF 1518 x 3.1/16 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

160 mm 49 N/mm²
165 mm 165 mm

skf SAF 1610 T SAF and SAW pillow blocks with bearings on an adapter sleeve

Set Screw 1430 kgf
88.9 mm Cast Iron

skf SAF 23026 KA x 4.7/16 SAF and SAW pillow blocks with bearings on an adapter sleeve

1482 lb 37.6 mm
Contact/Lip 129517

skf SAW 23524 x 4.1/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

0.19 398 mm
Open 24 mm

skf SAW 23524 x 4.1/4 T SAF and SAW pillow blocks with bearings on an adapter sleeve

AN22 Steel
4.395 in 106.299 mm

skf SAFS 22520-11 x 3.1/2 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

skf SAFS 22520-11 x 3.1/2 TLC
1 pcs Negotiable

skf SAFS 22540 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

3150 lbf Conveyor Hanger Unit
1/2-13UNC 2.9063 in

skf SAF 22538 x 7 T SAF and SAW pillow blocks with bearings on an adapter sleeve

65 mm ABEC 3 (ISO Cla
120 mm Single Row Non-Fill

skf SAFS 22524 x 4.1/8 SAF and SAW pillow blocks with bearings on an adapter sleeve

8.4688 in Uncoated
Standard Duty Split Pillow Block

skf SAW 23538 x 7 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve

212 WS502
Non-Expansion Bearin 2.4375 in
1/17